5000 Block Public PoSign & STATIC test

Thread Status:
Not open for further replies.
  1. CCRevolution
    Administrator Staff Member
    Messages:
    59
    Likes Received:
    150
    Trophy Points:
    33
    November 19, 2017 at 10:17
    Next Test Instructions:

    First you must download the XCITE client from here: https://drive.google.com/open?id=1ti1EU-vH-YSPhZHO_y0q26RUkIwVvg88

    (before you run, empty the contents of the XCITE folder in the Roaming section)

    Also, add a xcite.conf file to the folder, making sure nothing else is there, with your PoSign key included as such:

    rpcuser=x
    rpcpassword=y
    server=1
    daemon=1
    listen=1
    debug=1
    reindex=1
    posignkey=CrZfetxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (very long key)

    Now you can run your XCITE client.

    Next, you will go to the debug console and open the debug log file and you want to find: importable private key and you then copy that key. Do not include the final 4 characters "init".

    Now, in the debug window console, type: importprivkey copiedkeyxxxxxxxxxx

    NOTE: The stored importable private key of debug.log is temporary only. This is no security issue. I will remove this shortly. This required the coin distribution only. I created a importable private key from the posign key because this required for storing and connecting block rewards to STaTiC.

    I say again this is temporary solution only.

    Immature coins will be spendable after 120 confirmations and at that point you can all start sending and receiving.

    -----------------------------------------
    https://drive.google.com/open?id=1iB5qsoOYSikdGOpckGks64v1rG6y2r8b
    This is the linux version of XCITE
     
    Last edited: Nov 20, 2017
    BryanK likes this.
  2. BryanK
    Member
    Messages:
    20
    Likes Received:
    11
    Trophy Points:
    3
    November 19, 2017 at 10:19
    Woot!
     
  3. molten
    Well-Known Member
    Messages:
    113
    Likes Received:
    37
    Trophy Points:
    28
    November 19, 2017 at 10:25
    Yes!
     
  4. chef
    New Member
    Messages:
    5
    Likes Received:
    4
    Trophy Points:
    3
    November 19, 2017 at 10:33
    Very cool! Excited to try this out :D
     
  5. CrazedArabMan
    Member
    Messages:
    39
    Likes Received:
    9
    Trophy Points:
    8
    November 19, 2017 at 11:04
    I followed the full instructions up to the debug window and have tried multiple different ways to get the private key, but nothing seems to be working. Do you copy the private key from the debug file and put that in the debug window or what exactly. I'm a little confused here. Like I said, I did everything exactly up until that point.
     
  6. molten
    Well-Known Member
    Messages:
    113
    Likes Received:
    37
    Trophy Points:
    28
    November 19, 2017 at 11:18
    Copy the Importable private key from debug.log. Go to console and input importprivkey and the previously copied key.
     
  7. Seb59
    Member
    Messages:
    47
    Likes Received:
    14
    Trophy Points:
    8
    November 19, 2017 at 11:24
    Next, you will go to the debug console and open the debug log file and you want to find: importable private key and you then copy that key.
     
    Last edited: Nov 19, 2017
  8. nickdegre
    Member
    Messages:
    34
    Likes Received:
    11
    Trophy Points:
    8
    November 19, 2017 at 11:28
    Is there a way to confirm that i have done everything properly?
    Receiving transactions must be some kind of confirmation, right?
     
  9. CrazedArabMan
    Member
    Messages:
    39
    Likes Received:
    9
    Trophy Points:
    8
    November 19, 2017 at 11:29
    Did that and got the key, but when I type it in, it just says invalid private key. Is the posign key you type in the xcite.conf file is supposed to be your test node private key correct?
     
  10. Seb59
    Member
    Messages:
    47
    Likes Received:
    14
    Trophy Points:
    8
    November 19, 2017 at 11:30
    Yep, you will receive coins
     
  11. nickdegre
    Member
    Messages:
    34
    Likes Received:
    11
    Trophy Points:
    8
    November 19, 2017 at 11:31
    Good, then i'm set up properly.
     
    Seb59 likes this.
  12. CrazedArabMan
    Member
    Messages:
    39
    Likes Received:
    9
    Trophy Points:
    8
    November 19, 2017 at 11:49
    Figured it out, don't include the "init" part of the key
     
    CCRevolution likes this.
  13. CCRevolution
    Administrator Staff Member
    Messages:
    59
    Likes Received:
    150
    Trophy Points:
    33
    November 19, 2017 at 11:51
    Thank you! Fixed...
     
  14. CrazedArabMan
    Member
    Messages:
    39
    Likes Received:
    9
    Trophy Points:
    8
    November 20, 2017 at 12:03
    62 Blocks, just over half way.
     
  15. josephang
    New Member
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    November 20, 2017 at 12:17
    We all should post here our addresses to be ready to send and receive test XBY when all is confirmed.

    This is mine:
    XEx5724vcSDtt1DCDUjyJ6TyHN2iWbQhDp
     
  16. BryanK
    Member
    Messages:
    20
    Likes Received:
    11
    Trophy Points:
    3
    November 20, 2017 at 12:28
    Typed up a little bit of a simpler instruction. Let me know if you have any issues. I'm in slack if you need support.

    1. Download XCITE wallet: https://drive.google.com/open?id=1ti1EU-vH-YSPhZHO_y0q26RUkIwVvg88

    2. Within appdata/roaming/xcite (if you do not have an xcite folder yet, run the wallet and close it)
    a. Create a new xcite.conf file

    b. Contents:


    rpcuser=x
    rpcpassword=y
    server=1
    daemon=1
    listen=1
    debug=1
    reindex=1
    posignkey=your_posign_key​


    3. Take your testnet key pair (posign) private key and replace your_posign_key

    4. Within appdata/roaming/xcite, open debug.log

    a. Search for “importable”

    b. Copy the address provided Do not include the final 4 characters "init"

    5. Open xcite debug console

    6. Type “importprivkey copied_priv_key”. Replace “copied_priv_key” with the address you copied from the debug.log
     
    Last edited by a moderator: Nov 20, 2017
    CCRevolution and fish313 like this.
  17. BryanK
    Member
    Messages:
    20
    Likes Received:
    11
    Trophy Points:
    3
    November 20, 2017 at 12:32
    If you are using one of the posign keys, you will automatically get 6500 test xby when you mine a block.
     
  18. CrazedArabMan
    Member
    Messages:
    39
    Likes Received:
    9
    Trophy Points:
    8
    November 20, 2017 at 02:17
    For some reason I was thinking 120 was the blocks but that's just the confirmation, so nvm on my earlier post, 5000 is going to be a ways to go.
     
  19. fish313
    Well-Known Member Staff Member
    Messages:
    102
    Likes Received:
    82
    Trophy Points:
    28
    November 20, 2017 at 05:00
    Cool guys! I have misplaced my testnet private key lol, its been awhile since I've looked at it. Yankee, Bryan, do you guys have the spreadsheet with our info?
     
  20. Yankee Ruin X
    Well-Known Member
    Messages:
    177
    Likes Received:
    91
    Trophy Points:
    28
    November 20, 2017 at 07:17
    Sent DM on Slack
     
Thread Status:
Not open for further replies.